Lekato Wireless Microphone System

LEKATO MW-1 5.8GHz Wireless Microphone System Plug-on Rechargeable Wireless Transmitter Receiver For Effector Dynamic Microphone
Perfect for Dynamic Microphone, Audio Mixer, DSLR Camera, PA System and so on.
🎤Plug & Play🎤No Latency🎤No-Interference🎤4 Channels 🎤 ≥ 100ft / 30M Transmission Range 🎤LEKATO Product Features: 🎤No Interference Wireless System : Transmitter and receiver system utilize the 5.8GHz ISM frequency band, free from interference.  Designed for any dynamic/harmonic mic, no need the cable. Up to 100ft of wireless range. (Not work with condenser mic) 🎤High Quality Sound Transmission :  24bit Audio Resolution with Sampling Frequency of 48K provides stable and reliable wireless transmission.  Less than 6ms latency, no lag or no signal loss.  Ensures good performance for your every time. 🎤Built-in Rechargeable Battery & Power Indicator :  Transmitter and receiver can charge simultaneously with the dual port USB cable. More than 5 hours playing time.  You can know the battery level when turn on the unit and the related channel's indicators. 🎤1-Key and Multi-Channel ： Long press the signal key to match transmitter and receiver at the same time. 4 switchable channels, a maximum of 4 sets receivers can be matched with the same transmitter simultaneously. 🎤Dynamic- XLR transmitter and XLR receiver :  Works with any dynamic/Harmonic microphone or battery-powered condenser wireless microphones system, Audio mixer, PA system, Provides stable and reliable wireless transmission. Product Specifications:  🎤MW-01 receiver

• Power supply mode: built-in lithium battery
• Cell capacity:3.7V 400mAh
• Reception Sensitivity:- 85dBm
• Received frequency:5 8GHz frequency
• Anti-jamming method: Frequency hopping
• Signal Distortion:<0.02%
• Gain:0 dB
• SNR:105dB
• Frequency response: 20Hz - 20KHz
• Delay time:<5ms
• Sampling rate:24-bit /48KHz
• Output Impedance:6800
• Port's type: XLR male port

  🎤Transmitter and Receiver Pairing The default setting for MW-1 microphone wireless system is Channel 1, if you want to use other channels, please proceed according to the following steps: . 1.Turn on the receiver and the transmitter. 2.Connect the receiver to the microphone and the transmitter to the mixer or other equipment. 3.You can long press the channel switch button to pair up the channels of the receiver and the transmitter, the signal is to be paired up when the status indicator flickers blue. 4.When they' re paired successfully, the status indicators on both of the transmitter and the receiver become blue.   🎤Battery charging

• You can see the receiver and transmitter's battery level when you turn on the unit and the related channel's indicators.
• When the status indicator starts to flicker in red, it indicates low battery, and it's time to charge the unit.
• When the unit is being charged, the status indicator is in red.It goes off when it's fully charged.
• Attention: You can charge the transmitter and receiver simultaneously with the Dual Port USB Cable.

NOTE:Only suitable for dynamic microphones Package Included:

• 🎤1 * Wireless microphone system MW-1 Receiver
• 🎤1 * Wireless microphone system MW-1 Transmitter
• 🎤1 * Rechargeable Power Cable

5.8GHZ ISM Band

• Frequency response : 20Hz - 20KHz
• Sampling rate : 24-bit / 48kHz
• Signal Distortion: < 0.02%
• Delay: < 5ms
• Signal to Noise Ratio: > 105dB

Rechargeable Long Battery Life

• Fast charging, long standby
• Full power working time: ≥5h(Fully charged)
• Transmission Range: ≥30M / 100ft
• Visible battery level (4 level)
• Come with Dual-end Charge Cable

4 Channel Automatic Pairing

• XLR Port
• Long coverage area and strong compatibility
• Just plug then you can play
• The 4 tunnels can be switched at will and automatic match
• Ensure the clarity of the sound

Customer Questions & Answers：

🎤Question: I use a Lekato 5.8ghz guitar wireless. Will this Lekato 5.8ghz wireless mic adapter interfere with the guitar wireless and vice versa?

🎤Answer: Unlikely to interfere as there are 3 band widths in the 5.8GHz range you can select by pressing the pairing button to pair with your mic receiver/ transmitter.   
By Gamini on July 18, 2022

Yes! this is an amazing product that will interface with your guitar with no problem! It will virtually interface with any XLR connector & it'll transmit and receive up to 30 feet.   
By Benny on July 19, 2022

🎤Question: Will this transmit a line level signal without noise

🎤Answer: I have used it to transmit for SM58 mics with no noise. I have use it to transmit from a mixing board to a powered speaker system (think Bose L1) never had any noise. One night I actually used two of them on mics and one to the powered speaker system. No noise. 
By Jim Cobia on February 8, 2023

I’ve used this item in conjunction with AKG Mics D7 & D330BT’s with no notices from noise in relation to the same mics being hard wired through SoundCraft UI24. Make sure you keep the receiver & transmitter charged. 
By William D. Harry on February 10, 2023
I have had mine for a couple years, for my application, “Karaoke” it is an affordable option with extremely low (unnoticeable to the ear) noise.

By Scott G on February 8, 2023